Viewing 8 posts - 1 through 8 (of 8 total)
    • Author
      Posts
    • #14395
      MyPrevost
      Keymaster

      2002 XLII.

      Have individual belts on the fan drive.

      Part prevost 506990.  DAYCO AX74

      I have purchased two sets of 3 and can not get equal length.

      Does any body have the part number for the 3 V-belts as one.

      #14397
      MyPrevost
      Keymaster

      3/A74 on Amazon for about 36 bucks.

      Bill and Janet
      1998 40 foot Country Coach (2020-current)
      1988 40 foot Country Coach (1999 to 2020)
      Winegard Trav’ler for DirecTV
      Roof airs! Yeah!
      2020 Jeep Cherokee Toad
      Boo and Buddy on board

      #14398
      MyPrevost
      Keymaster

      3-in-1 banded cogged v-belt # AX74/03 for crankshaft pulley to 90* gearbox.

      To drive the OTR compressor 2-in-1 banded cogged v-belt # BX97/02

      Both purchased from:

      https://www.vbeltguys.com/

      #14399
      MyPrevost
      Keymaster

      Do these belts (especially the triple) have enough flexibility to get between the trailer hitch and the crankshaft pulley?

      1999 XLV chassis X1026872, 2000 Liberty Elegant 440 Lake Havasu City, Az

      #14400
      MyPrevost
      Keymaster

      yes

      #14401
      MyPrevost
      Keymaster

      What he said!  ^^^^

      Bill and Janet
      1998 40 foot Country Coach (2020-current)
      1988 40 foot Country Coach (1999 to 2020)
      Winegard Trav’ler for DirecTV
      Roof airs! Yeah!
      2020 Jeep Cherokee Toad
      Boo and Buddy on board

      #14402
      MyPrevost
      Keymaster

      I should have checked this posting (and checked my belts) before leaving today. 50 miles into our trip I had the coolant temp shoot up and got the red stop engine light. Turns out the 3 belts tossed off and only two were still lying around. I managed to find a NAPA close but had to go with 3 x A73 belts, which took a little bit of finesse to get on.  I now have two of the banded belts on order.

      #14403
      MyPrevost
      Keymaster

      Have PSI set at 50PSI for belts ?

    Viewing 8 posts - 1 through 8 (of 8 total)
    • You must be logged in to reply to this topic.
    Top