…
    Viewing 4 posts - 1 through 4 (of 4 total)
    • Author
      Posts
    • November 21, 2024 at 9:25 pm #31088
      MyPrevost
      Keymaster

      Today as I was draining the coolant and noticed a hole in the side of the muffler.  It appears something on the road flew up and cut a hole about 2 inches long on the inboard side of the muffler.  It is not a rust hole but a cut.  The muffler seems solid.I really don’t want to buy a new muffler.  Has any one welded on a muffler with any sucess? I have been thinking of a patch of some kind.  Tomorrow I will inspect the tires on the muffler side of the coach for any damage.

       

        Larry & Pat Walker. Sold bus alftr 9 years
      November 21, 2024 at 9:26 pm #31090
      MyPrevost
      Keymaster

      Larry,

      I patched one with thin metal, used rivets to secure and high temp caulking for stove pipes.

      Tom & Nancy
      7 Prevosts Owned

      November 21, 2024 at 9:26 pm #31091
      MyPrevost
      Keymaster

      Just a quick message of caution if you or someone says they can repair your muffler with a quick weld.

      Unplug  and swithch off every toggle switch you have unplug from shore power  and most important…… make sure your invertors are turned off.

      AL
      Bus Less in KC,MO
      3 Marathon’s owned 1- XL 2-H3

      November 21, 2024 at 9:26 pm #31092
      MyPrevost
      Keymaster

      A good muffler shop should be able to gas weld it.

      David
      1993/94 XL Vantare 8V92
      DeLeon Springs , Fl.

    • Author
      Posts
    Viewing 4 posts - 1 through 4 (of 4 total)
    • You must be logged in to reply to this topic.
    Top